Home » Blogs » What Are The Models And Prices Of Wet Ball Mill?
wet grinding ball mill onsite

What Are The Models And Prices Of Wet Ball Mill?

Ball mill is a type of grinding equipment widely used in industrial production, which is suitable for pulverizing all kinds of ores and other materials. There are many kinds of it, the most basic of which can be divided into dry ball mill and wet ball mill.

Wet ball mills, also known as wet grinding ball mills, are mostly applied to treat raw materials with high moisture and argillaceous content. Compared with the dry ball mill, it has stronger adaptability, continuous production, 5% – 10% lower investment, and less auxiliary equipment.

What are the models and prices of wet grinding ball mills? We will talk about them in the following content.

Working Principle Of Wet Ball Mill

During operation, an appropriate amount of water needs to be added into the grinding chamber of the wet ball mill. Besides, the grinding chamber is also filled with steel balls of different specifications. After raw materials enter the grinding chamber through a hollow journal at one end, the steel balls produce impact force and friction force on the material with the rotation of the cylinder to realize pulverizing. Along with the continuous feeding, raw materials that have entered first begin to move to the other end. The qualified materials will finally get out of the grinding chamber from the discharge port. The unqualified materials will be sent back to the grinding chamber for regrinding.

ball mill grinding

Specification Of Wet Ball Mill

AGICO is a professional ball mill manufacturer with more than 20 years of experience. We sell different types of ball mill grinders to customers. The wet ball mill we provide has a capacity of 0.65-615 tons per hour, the allowable feed particle size is less than or equal to 20mm, and the discharge particle size is between 0.074-0.89mm. At present, we have 34 models for clients to choose from. The specific models and parameters are listed below.

ModelRotation Speed(r/min)Grinding Media Load(t)Feeding Size(mm)Discharging Size(mm)Capacity(t/h)Motor Power(kW)Weight(t)
Ф900×180036-381.5<200.075-0.890.65-218.55.85
Ф900×3000362.7<200.075-0.891.1-3.5226.98
Ф1200×2400363<250.075-0.61.5-4.83013.6
Ф1200×3000363.5<250.074-0.41.6-53714.3
Ф1200×450032.45<250.074-0.41.6-5.85515.6
Ф1500×300029.77.5<250.074-0.42-57519.5
Ф1500×45002711<250.074-0.43-611022
Ф1500×57002812<250.074-0.43.5-613025.8
Ф1830×300025.411<250.074-0.44-1013034.5
Ф1830×450025.415<250.074-0.44.5-1215538
Ф1830×640024.121<250.074-0.46.5-1521043
Ф1830×700024.123<250.074-0.47.5-1724543.8
Ф2100×300023.715<250.074-0.46.5-3615545
Ф2100×450023.724<250.074-0.48-4324556
Ф2100×700023.726<250.074-0.412-4828059.5
Ф2200×450021.527<250.074-0.49-4528054.5
Ф2200×650021.735<250.074-0.414-2638061
Ф2200×700021.735<250.074-0.415-2838062.5
Ф2200×750021.735<250.074-0.415-3038064.8
Ф2400×30002123<250.074-0.47-5024558
Ф2400×45002130<250.074-0.48.5-6032072
Ф2700×400020.740<250.074-0.422-8038095
Ф2700×450020.748<250.074-0.426-90480102
Ф3200×45001865<250.074-0.4/630149
Ф3600×45001790<250.074-0.4/850169
Ф3600×600017110<250.074-0.4/1250198
Ф3600×850018131<250.074-0.445.8-2561800260
Ф4000×500016.9121<250.074-0.445-2081500230
Ф4000×600016.9146<250.074-0.465-2481600242
Ф4000×670016.9149<250.074-0.475-2521800249
Ф4500×640015.6172<250.074-0.484-3062000280
Ф5030×640014.4216<250.074-0.498-3862500320
Ф5030×830014.4266<250.074-0.4118-5003300403
Ф5500×850013.8338<250.074-0.4148-6154500525
Wet Ball Mill Specification

AGICO Wet Ball Mill Project

Raw Material: slag
Feeding Size: <25mm
Discharge Size: 0.074-0.4mm
Capacity: 500t/d
wet ball mill onsite agico
Wet Ball Mill Project Onsite

Features:

It adopts an antifriction bearing instead of a sliding bearing, which greatly reduces friction and saves energy.
Although the power consumption is high, the operation cost of the whole system is low, which is only 1 / 3 of the dry grinding system.
The surface of the magnetic lining plate absorbs a layer of ferromagnetic substance to form a protective layer so that the lining plate will not be worn directly. It prolongs the service life to 5-8 times the original and effectively reduces the repairing time and workload.

What Is The Price Of Wet Ball Mill?

On the market, the price range of wet ball mills is large, usually between 15000-150000 dollars. Because the ball mill models purchased by customers are different, and each enterprise spends different raw material costs and technical inputs to manufacture equipment, the quotation is various.

Wet ball mills manufactured by AGICO enjoy ex-factory prices. If you are interested in our equipment, please feel free to send an inquiry. We will recommend the most suitable ball mill models, send quotations and other information based on your specific needs.

Share this post:
Scroll to Top